Відео

Yay low flow, how great, I'm sure everyone wants shit flow in their expensive shower.

Grohe's written directions suck!! These videos are somewhat helpful. But, still lacking!

I replaced the hose for my Grohe 30306DC0 SuperSteel Eurosmart Pull-Out Spray Kitchen Faucet. Thanks for a great video. However, the hole on the new weights seem to be smaller and I can't get it to close around the hose. Are there different sizes for the weights? The old one had screws, this one a clip.

We need to reinstall our Euphoria unit. Can you purchase the easy install adapter kit separately?

Huh, I think some steps involving pipes would be handy.

is it normal to have lower pressure when turning it to hot water ?

Hi @GroheAmeria - My system sprays water around where the blue hose connects to the adaptor (as seen at 1:11). It seems the clamping / sealing system has changed as my system and instructions show a different red clamp from the one in the video seen at 1:17. Please advise how to proceed.

is this faucet possible to turn around (for a dual sink)?

video very jerky hard to see details parts of the actual cartridge.

So easy. Do you have a video of doing this with your right angle faucet? I can't seem to get the hose out ..

⚠⚠⚠ Vous fixer votre étanchéité dans le mauvais sens! Elle doit tjrs être posé dans le sens du vissage sinon ben c'est logique, elle se défait quand on vis! ⚠⚠⚠ Entre AXE des culasses 150MM à prévoir AVANT de carreler.

This video just saved me. Thank you!

That’s it????

So the outside of the plaster guard is flush with the outside of the tile ?

Hi does the adapter that u put flash with tiles comes with shower kits or do u have to buy them separate?

My euphoria is leaking and I want to reinstall it. What is the part number for the easy install adapter?

Hello, I have this faucet in my kitchen and I’m looking for an adaptor to enable this to use with a hose to clean my terrace. Do you know any suitable adaptors that I can buy? Thank you!

Cool job 😂😂

remove lime from thermostatic

This method is so stupid. THe USA already has a working threading system. WE don't want your euro threads. Make the valves work with the US threads.

Hiii. What thread and sealant is recommended for the pipes?

soll ich hier etwas schreiben? Liest das jemand? Genau den Duschkopf habe ich gekauft. Die fehlende Kröpfung ermöglicht es mir nicht den Duschkopf horizontal auszurichten. Dabei habe ich doch eine Grohe Wandhalterung. Aber man kann sie nicht waagerecht stellen. Selbst wenn ich sie waagerecht stellen könnte, dann wäre da ja eine Knickbelastung auf dem Schlauch. Wodurch er schneller altert und auch ständig gegen die Wand schabert. Was für eine Fehlkonstruktion! Und das nennt sich dann Made in Germany. Eine Schande ist das! Diesem Duschkopf fehlt eine 30 Grad Kröpfung. So einfach ist das!

How do I get a new washer set for this fixture?

Mi mando no tiene tapa y no se como quitar el tornillo. Lleva. Como una goma hacia dentro

So I’m not the only one that thinks Grohe stuff is now rubbish. Original German Grohe used to make about the best plumbing products available, then they took over a Chinese manufacturer and in 2014 sold out to a Japanese multinational. Bought a tap/faucet recently and it’s the first one in 40 years that was cracked and leaking straight out of the box ! Just trading on the name now, like so many other crap producers !

You install rain shower and handheld buttons incorrectly.

Vídeo not full like yo see the shower body install

Imagine you have static electricity in your hands💀

It dosn't work at all

The push button is crap. Avoid.

Yeah new version vs old wrt cutting the spindles and a really ambiguous step 14 that I interpreted as remove the locks, made me cut mine too short. Would have been helpful for the new videos to warn about the different cutting procedures. Now I have to find replacement spindles, which of course have no product number and only seem to come with replacement valves. :(

How do you clean the nozzle or replace the filter?

What does maintenance free for a lifetime mean? Drip Free? Warranty?

Hello, i got this minta 30274000 faucet, but there is no copper colored hose, i got light grey colored hose instead, How to check if i got the counterfeit or genuine?

More a question than a comment. I just purchased the essence Smart Control faucet. Love the functionality, but I want to increase the flow rate from 1,75 GPM to 2,0 or 2,2. I found the yellow flow restrictor. Is there a part that moves this up to 2,0 or 2,2?

What is the size of the wall outlet for this product?

What model of faucet is in this video ???

Well the video makes it look so easy. Not quite as straigtforward and thanks to those who added some useful comments. On my K7 the cartidge nut is 30mm and fortunately I had a socket this size in my inventory. After installing the new cartridge it leaks badly directly through the cartridge and not around it. Contacting Grohe Canada for assistance.

Dear, I have a problem and I need to know how to solve it please: Grohe Smart Control Perfect Shower No matter how I install the blue knob, when it comes to regulating the water to be able to mix the cold water with the hot water, it cannot do so. either it comes out very cold, or it comes out very hot. It is impossible to regulate it to a warm nice temperature. Could you tell me what the problem would be and, if applicable, the spare part that I should replace to buy it. Thank you

Dear, I have a problem and I need to know how to solve it please: No matter how I install the blue knob, when it comes to regulating the water to be able to mix the cold water with the hot water, it cannot do so. either it comes out very cold, or it comes out very hot. It is impossible to regulate it to a warm nice temperature. Could you tell me what the problem would be and, if applicable, the spare part that I should replace to buy it. Thank you

My faucet is Grohe K7. it's neck shape is bent almost 85-90 degree angle. I cannot insert the metal replacement hose (part no: 46174000). Are there any solution?

Y

I had a new idea. All faucets must be connected to the tap water and if the water is cut off, water will not come from the faucet. It would be very interesting if it is possible to make faucets that do not need to be connected to tap water and can still meet people's needs with water from a tank when the water is cut off. And if the taps are in a state where they pour water like a dropper, even one liter of water can be used to do everything and a lot of water will be saved.

Thank you for these very helpful instructions. Finished the install and it the faucet won’t turn on. Followed your installation instructions perfectly

تشکر و سپاسگزاری

Why why why. 12mm- 14mm ? How about you pick a size that comes standard. And how about using tapered threads so that the threads make the seal, not some stupid glorified teflon tape. This is a garbage install, always hate them. As a plumber, never recommend

Und jetzt noch ein Mal ohne Schnitt! 👎

Useful

Woww

what is the max flow rate for the fixed shower head?